All About The Painting Daily

What are the different types of concrete stain?

Aug 17

Staining is a simple and inexpensive way to increase the aesthetic appeal of concrete surfaces. The flooring type is made by pouring a water-based substance onto a concrete surface that has been cleaned.


Concrete Staining

Sealers help protect stains from fading and wear. Concrete is very absorbent, and staining can be done in any color you could imagine. Various chemicals and processes are used to concrete staining Albuquerque in various colors and shades.


What are the various types of concrete stains?


It's possible for you to categorize the concrete staining into two categories:


Concrete is stained with the use of a chemical that is reactive.

Reactive concrete stains are typically made from inorganic metallic salt or hydrochloric acid. They react with concrete minerals. The chemical reaction forms an unbreakable bond with concrete and also etches the surface to create marble-like effects.


Reactive and acid stains provide fewer color choices than non-reactive and water-based stain types. Additionally, they require greater safety precautions.


Concrete staining that's non-reactive

Chemical reactions aren't needed to produce color in non-reactive colors, water-based acrylic polymers, and pigments. It's made to penetrate deeper through concrete and deposit color particles within the pores that are open on the surface.


A sealant layer is sprayed to the surface to prevent the stain from becoming faded or peeling, or flaking.


Polymer-bonded technology used in water-based stains can, for instance, lower the possibility of the stain peeling away, discoloring, or flaking. All the while being eco-friendly.


Water-based stains are becoming more popular due to their being in various tones and colors. They can range from the most delicate and transparent tones to vibrant solids.


There are no negative consequences when mixing non-reactive colors to make new colors since they don't react with the concrete. Non-reactive stains, on the other hand, do not contain acids or solvents, making them easier to apply.


Concrete staining Albuquerque, reactive and non-reactive, is a fantastic method of bringing new life to worn-out surfaces such as countertops and concrete slabs, garage floors, patios, indoor concrete floors, and fireplace walls.


The Staining Process for Concrete


Concrete staining Albuquerque is a simple but time-consuming procedure that can take up to two days to complete. Concrete staining is a process that involves the following steps:


Concrete Surface Preparation

  • However old the concrete is, careful surface preparation is vital.

  • Concrete and grinding solutions thoroughly cleanse concrete surfaces, removing all residues, dirt, and grime.

  • Before staining, any previous stain or coating on the concrete surface has to be removed.

  • Concrete crack sealants will be utilized if there are any.

  • To clean up any scratches, a floor cleaner can be utilized.


Techniques for Staining


  • Put a piece of tape on the surface to stop stains from settling.

  • The stain must be gently dispersed in water to get the desired shade.

  • You can apply the coating with an airless sprayer or a brush.

  • Based on the humidity, temperature, and airflow, the newly applied stain may take up to 10 hours to dry completely.

  • To achieve a darker shade, repeat the previous steps.


Removal of the Spillage

  • Rinse the concrete thoroughly with clear water to wash away any remaining residue.

  • T.S.P. or baking soda can neutralize acid stains.

  • Utilizing a brush, the final rinse will remove any leftovers.

  • Putting on a Sealant

  • Concrete sealers can be utilized to protect concrete from staining.

  • After sealing, the concrete is left to cure for one day.

  • To get the most lasting outcomes, it is recommended that you apply two coats.


Concrete Contractors Albuquerque

5416 La Colonia Dr NW, Albuquerque, NM 87120