All About The Painting Daily

How to Restore the Color of Old Bricks

Apr 13

If you've decided to restore the color of old bricks in your home, you'll need to first clean the area thoroughly. A pressure washer will remove most dirt and grime, but some may still remain, so you should use a brush to scrub stubborn dirt off the bricks. You can also use detergent to get rid of tough dirt. Once you've finished cleaning the area, allow it to dry.


If you are wondering how to clean old bricks, there are several methods you can use. The good news is that it is easier than restoring and resurfacing concrete. These methods use natural products that are cheaper and safer than commercial cleaners. One method uses a mixture of baking soda and dish soap. This mixture contains both grease-removing and abrasive properties. Mix a half-cup of baking soda with three tablespoons of dish soap. Apply this solution to the brick, leaving it for about 10 minutes. Wipe it off with a soft cloth. This method is good for small areas, and if you need to remove larger patches, you can use vinegar cleaner.

When cleaning old bricks, be sure not to use power washing because this can damage the bricks. Instead, use a brush and scrub stubborn stains. You can also use certain products diluted in water to remove built-up. For additional scrubbing power, add some table salt to the cleaning water. Once you've cleaned the bricks, you can apply a sealant to them. If you're unsure of how to clean old bricks, consult a brick repair professional for help.


If you are looking for a cheap and easy way to bring old bricks back to life, you can always try painting them. Brick staining is a faster option than painting, but it is important to keep in mind that painting covers the brick texture. Before you start painting your old bricks, test a small portion of them first. If you do not like the color, you can always add more pigment or water to get the desired result.

Before you start applying paint to your bricks, you need to consider the condition of the bricks. If they are in bad shape, you should never paint them. Regular paints block the natural pores of the brick surface and may cause spalling or other damages if moisture freezes. Also, if you do this, you have to take off the old paint first. Otherwise, you will just end up with an even worse look than before.

Apply Sealer

Before you apply sealer to restore the color of old brick walls, you must prepare the brick surface properly. It should be free of weeds and paint and should be clean and dry. Do not pause while spraying, as this will cause buildup. Then, a paint roller should be used to apply the sealer. This will ensure that the sealant is well penetrated into the pores of the bricks.

Exposure to sunlight and other elements ages the brickwork, causing it to lose its original color. Applying a quality sealer is an effective way to restore the color to faded bricks. You can use a hand-held brush for small areas, or hire a professional to apply a spray on larger areas. Different brands of brick sealant require several coats, while others can restore color after just one application.