All About The Painting Daily

6 Things You Need to Know Before Installing Interior Trim in Denver, Colorado

Dec 1

Many people living in the Denver, Colorado region are looking for interior trim and molding installation. There is a lot of information out there about interior trim installation in Denver, but we want to share with you some things that you should know before you install any interior trim. We will also talk about what types of interior trims are available for your home.

The trim molding installation stage of any interior project may be thrilling. A drywall and paint project can be transformed into a beautiful work of art with baseboard and crown moulding. You're probably feeling a bit nervous if you've always admired exquisite trim work but have no idea where to begin. There's no need to be concerned. With these interior trim moldings installation tips, you can create interior décor that is truly beautiful.

First of all interior trim installation requires the proper tools and materials. You must have a miter saw to cut your moldings into different angles for corners or outside walls if necessary. While most interior projects don't require complex angled cuts, they do need tight fitting joints. If you're using interior trim installation with paint, it's important to purchase materials that match. The last thing you want is for your new moldings or baseboard to look different than the rest of the room!

Gather the Right Tools for Installing Trim

If you don't have a compound miter saw, making accurate cuts that produce tightly mitered corners might be difficult. Hand-nailing baseboards and crown molding is also a time-consuming effort. While having a full set of equipment would be nice, it may not be possible for you. At the most basic level, you'll need:

  • Compound miter saw
  • Finish nail gun
  • Air compressor with a hose
  • Tape measure

The most crucial instrument is a sharp pencil. On any finish carpentry task, a high-quality pencil will be priceless. The distance between a decent and excellent trim installation may be less than 1/32 of an inch, so make sure your pencil is sharp to get the best results.

Calculate How Much Trim You’ll Need, and Buy a Bit More Than You Think You Need

Don't let a material error cause your project to fall behind. To account for errors, waste, and overlapping joints, you'll need about 20% more material. Fortunately, there's a simple rule of thumb for estimating how much baseboard or crown molding is required. Count the length of each wall from corner to corner; any door or closet wall doesn't count.

Then multiply the length of each wall by two to get your square footage figure. For example, if you have a room that's 12 feet long and 11 feet wide (144 square feet), you'll need about 188 linear feet of interior trim installation material; 144 x 21/32 = 187.44 ft., which rounds to 188 linear feet.

After that, round up to account for mistakes or waste. For interior trim and molding installation in Denver projects that involve doors, bathrooms, kitchens and other areas where the room's square footage is likely to change slightly due to changes in flooring plan (tile floors are thicker than carpeted ones), you may want to include a contingency for this in your calculations.

Use a Compound Miter Saw to Make Accurate Cuts

Trimming is a breeze using a compound miter saw. These power tools have quick-spinning saw blades that cut through wood swiftly and accurately. Compound miters saws include rotating beds with pre-determined detents that click into place at the most common cutting angles. They also incline from side to side in order to cut compound angles.

Make an exact mark on the board where you need to cut with a sharp pencil. Lower the blade until you can line it up precisely with your mark, then set it up carefully. After you're happy with the saw's alignment, lift the saw so the blade isn't touching anything. Now fire up the saw, let it warm up for a few minutes, and make your cut.

It's important to remember that interior trim installation in Denver isn't a one-man job; you'll want an extra set of hands nearby for this task. Before setting the blade in motion, get someone to help you hold boards steady while making cuts. If possible, raise the board slightly with a box or other object to make sure the blade doesn't pinch it against your body.

The procedure for cutting mitered angles is essentially the same, however they need you to set the saw to the correct angle. These saws include handles that let you turn the saw bed to whatever angle you need. To cut a 90-degree corner, use a 45-degree detent on your saw. You can carry out your operation as usual, and the saw blade will cut a perfect mitre.

If you’re not comfortable with working around power tools, interior trim installation may be challenging for you. However, if your budget is tight and you want to save money by doing it yourself; interior trim installation can be an excellent way to add value to your home while learning a new skill.

Get to Know the Three Types of Joints Used When Installing Trim

Use these three joints to install trim around the corners of your space or walls that are longer than the usual run of trim.

Coped joints: Inside corners are well-suited to coping joints. The molding's profile is closely followed with a coping saw after it has been cut at the required inside angle (typically 45 degrees). To back-cut the material slightly, hold the saw at an angle. The pattern fits precisely over the adjacent trim piece, resembling a puzzle piece fit.

Miter joints: The outside corners of a room may be created by cutting two boards at a 45-degree angle and fitting them together at a 90-degree angle where two walls meet. The coped method is often preferred because it is faster.

Scarf joints: Make two shorter boards appear to be a single long piece by utilizing a scarf joint. Using overlapping 45-degree angles across their faces, cut the ends of two boards into two pieces. To make the junction go unnoticed, marry these two angles when hanging these boards on the wall. For optimum results, drive nails through the connection.

Another technique to conceal small gaps is to place shims between the base molding and the wall. Closing a little gap in an inside corner with shims is a fantastic method. Glue and nailing through the junction before nailing to the wall offers for the best long-term results for an outside corner. It's also a smart idea to use this approach in interior trim installation in Denver, Co.

Paint Your Trim Before You Install It to Save Time and Energy

Painting crown molding on the wall may leave you aching for hours. Painting baseboards while resting your knees on the hard flooring is also awful. Painting before trim board installation in Denver can be a big time and energy saver if you have the space to do it.

For optimum success, get pre-primed boards whenever feasible. Cover a pair of sawhorses with trim boards. To paint your boards before your trim installation begins, utilize a brush, roller, sprayer, or some combination of both. For an excellent finish, do this for two to three applications.

When you've finished painting, let the paint dry thoroughly. This can take anywhere from a few hours to overnight depending on how wet your boards are and what type of finish is used. When it comes time for interior trim installation, all that remains is simple cutting as well as nailing or gluing your new boards in place with ease!

Hide Nail Holes Using Wood Filler and Sandpaper

When you're pleased with the look of your corner, nail into the lower 1½ inches of the trim with 2-inch finishing nails placed roughly 16 inches apart. Nailing into the bottom third of the molding increases your likelihood of hitting the inside surface of the wall. If you're installing crown molding, make sure to nail into both top corners and the middle of your boards.

When you're done, cover any nail holes with a wood filler until they are flush with the wood, then finish it off with paint or stain for the best results. Apply a little quantity of filler to each nail hole using your finger as a applicator. Allow about two hours for the filler to cure before sanding it down lightly with 220-grit sandpaper. Afterward, wipe the board with a damp cloth or tack rag to remove any sawdust particles that are left behind before you paint interior trim installation in Denver.

When it comes on installing interior trim installation around your space in Denver, Colorado be sure to keep these simple tips and techniques in mind! It might make all of the difference between interior trim installation that looks professional and interior trim installation that is an eyesore.

Harmony Painting in Denver, Colorado can help you with your baseboard installation, trim installation, and molding installation needs. Harmony Painting team of professionals is always available to answer any questions or concerns that may arise during the process. You’ll have a beautiful home in no time when we complete our work on your project! You can contact them at https://harmonypaintingdenver.com/denver-residential-painting-services/interior-painting/baseboard-trim-molding/.